1000 Watt Pure Sine Wave Inverter - 12Vdc to 120Vac


solar wind1000W Pure Sine Wave Inverter



1000W Pure Sine Wave Inverter


Description: High efficiency inverter, designed by the prestigious U.S. company Power Bright. It's able to convert the direct voltage of a battery 12V (or more 12V batteries in parallel) into an alternating voltage of 110V (frequency 60Hz), with a pure sine wave. It's therefore ideal to power all our electrical devices up to a maximum of 1000 Watt continuous power (peak power 2000 Watt). The pure sine wave inverter, unlike the modified wave one, provides as output a sine wave equal to or even better than that present in the electrical sockets of our homes and it's therefore recommended especially to supply sensitive loads, such as high quality audio / video systems, laptops, televisions, refrigerators, gaming consoles, motor appliances with variable speed, razors and more. IDEAL FOR CARS, TRUCKS, MOUNTAIN HUTS, CAMPERS, TRAILERS, BOATS.


Instructions: This inverter can be installed both horizontally and vertically, without any problems. It's recommended that the installation location is clean, dry, well-ventilated and around the inverter is a empty space of about 10 cm to facilitate the passage of air. One of the most important things is the choice of cables to connect the inverter to the battery. The cables, in fact, must have an appropriate section in order to avoid effects of overheating and loss of valuable energy. That's why, Mppt Solar has created a free program to help you about the electrical wire sizing between the inverter and battery. By the power of this pure sine wave inverter, Mppt Solar recommended to use cables with a minimum cross section of 8 AWG (10 mm ²). Once you have chosen the cables, we can connect the inverter to the battery, observing the correct polarity. It's advised to connect first the positive, then the negative cable. If, during the operation of the inverter, the battery voltage drops below 10.7V, the LED lights up and you hear a beep. If the battery voltage drops below 10V, the inverter enters in the protection mode and shut off automatically, protecting the battery.


1000 Watt Pure Sine Wave Inverter


The case of the inverter, realized in anodized aluminum, must be connected to the ground. The ground point may vary depending on where the inverter is installed. In a vehicle, the ground connection must be made to the vehicle chassis. In a boat, the connection must be made to the ground of the boat system. In a fixed location, directly in the ground.



Specifications:


Continued Power 1000W
Continued Power (20 Min) 1050W
Peak Load Power Rate < 2000W
No Load Current Draw < 0.9A
Total Harmonic Distortion < 3%
Input DC Voltage Range 10-15V
Output Voltage Range 115 +/- 3%
Output Frequency Range 60 +/- 3Hz
Max Outer Temperature < 65 C
Low Voltage Alarm Level 10.7V
Low Voltage Cut Off Level 10V
Short Protect yes
Overload Protect yes
Dimension (LxWxH) 16.7 x 9.2 x 3.2 in
Weight 11 lbs
Efficiency Rating 90%


Delivery time and shipping rates: Your order will be delivered within a period of 8 business days maximum. Packaging and shipping are completely free of charge within the contiguous 48 United States.




Price:   258.35 $   

In Stock

Add to Cart
1000W Pure Sine Wave Inverter


 

datasheetDatasheet of this 1000W Pure Sine Wave Inverter (839 KB)  


feedbackAny questions about this product?  
Write us »