Pwm Solar Charge Controller with LCD - 30A 12V/24V


solar wind30A Pwm Solar Charge Controller



30A Pwm Solar Charge Controller


Description: Powerful charge controller for photovoltaic applications, provided with an innovative system for calculating the state of charge through an effective adaptive algorithm "fuzzy logic". This calculation system (said SOC) has the function of guaranteeing the best charging process of the batteries and the correct display of the percentage of charge of the same batteries, thanks to a large and practical LCD display. If the charge value displayed is 100%, then it means that the batteries are fully charged. This controller for photovoltaic solar panels is able to automatically detect and charge both 12V batteries and 24V batteries and can handle currents up to 30A. It was developed and manufactured in Germany and presents the protections of overcharge, deep discharge, reverse polarity, short circuit and overvoltage. If you want to know what factors influence the correct choice of the charge controller, please visit the page "How to choose a solar charge controller".


Charge Controller Dimensions:


Dimensions of the Pwm Solar Charge Controller


Sequence of connections: First, connect the battery to the terminals of the controller through two power cables with section equal or greater than 6mm² and a length of less than one meter. Although the controller has protection from reverse polarity, pay attention to the connections! Then wait 15-20 seconds and connect the solar panel to the terminals of the controller. The output with the symbol of the light bulb (Load) The output with the symbol of the light bulb (Load) is used to power the battery voltage loads such as for example any of the bulbs. If you use a 12V battery, the maximum load shall not exceed 360W, whereas if you use a 24V battery (or two 12V batteries in series), the maximum load shall not exceed 720W. In the case where the battery voltage drops below a certain value (safety threshold), the loads connected to the output LOAD will be disconnected automatically by the controller. In this way, the controller provides maximum protection to the battery, safeguarding it against deep discharge.



Specifications:


System Voltage 12V (24V)
Own consumption 12.5mA
Open circuit voltage solar module < 47V
Module current (DC input side) 30A
Load current (DC output side) 30A
Reconnection voltage (SOC / LVR) 12.6 V (25.2 V)
Deep discharge protection 11.1 V (22.2 V)
End-of-charge voltage (battery side) 13.9 V (27.8 V)
Boost charge voltage 14.4 V (28.8 V)
Equalisation charge 14.7 V (29.4 V)
Set battery type liquid (adjustable via menu)
Ambient temperature -10 °C … +50 °C
Degree of protection IP 31
Overtemperature and overload protection YES
Overcharge and short circuit protection (automatic load reconnection) YES
Deep discharge and reverse current protection YES
Reverse polarity protection of module, load and battery (automatic load reconnection) YES
Visual indication of battery charge status (multi-coloured LED) YES
Visual indication of start and end of charging activity YES
Dimensions (X x Y x Z) 187 x 96 x 44 mm
Weight 350 g
Manufacturer Steca Solar (Germany)
CE and RoHS compliants YES


Delivery time and shipping rates: Your order will be delivered within a period of 8 business days maximum. Packaging and shipping are completely free of charge within the contiguous 48 United States.




Price:   211.79 $   

In Stock

Add to Cart
Pwm Solar Charge Controller


 

datasheetDatasheet of this Pwm Solar Charge Controller (263 KB)  


feedbackAny questions about this product?  
Write us »